MF-10 Filter Maintenance Guide

In terms of maintenance, the MF-10 filter has a modular design that allows users to quickly clean or replace the cartridge by removing it. If you encounter the problem of reduced filtration effect, you can give priority to checking whether the sealing gasket is displaced and whether the filter element is blocked. For example, if the TDS value of the effluent is found to be high, it is necessary to confirm whether the RO membrane seal is deformed or detached, and ensure that the installation direction is correct. For water purification systems with pressure drums, it is recommended to flush the water for more than 10 minutes after replacing the filter element, and close the pressure drum valve at the same time to avoid the residue of protective fluid. If there is leakage, it should be important to check the damage of the sealing ring or the fixed state of the clamp and handwheel. In addition, the filter supports customized services, and users can adjust the filtering accuracy, interface size and other parameters according to actual needs to meet the individual needs of different devices.