RV-02 Pressure Relief Valve Product Repair Guide

RV-02 cost-effective plastic structure pressure relief valve as an important part of the blower, there may be some minor problems in daily use due to various reasons, but as long as you master the correct maintenance method, you can easily restore it to good condition. First of all, it is important to ensure that the blower has completely stopped operating and cut off the power supply before servicing to ensure safe operation.

When it is found that the pressure relief valve is not accurately regulated or cannot be opened and closed properly, the first step is to check the surface of the valve body for obvious damage or foreign body blockage. If there is a blockage, use a clean, soft cloth or compressed air to clean it up. Next, check whether the seals inside the valve body are aged or worn, the aging of the seals will lead to pressure leakage and affect the normal operation of the pressure relief valve. If the seal is found to be damaged, it is necessary to replace it with a new seal of the same specification in time.

During the repair process, care should be taken to avoid unnecessary scratches or impacts on the plastic structure, so as not to affect its sealing and overall performance. After the repair is completed, when reinstalling the pressure relief valve, make sure that the installation is firm and the connection is not loose. Once installed, a simple pressure test can be performed to check that the pressure relief valve is working properly within the set range of 300 - 600mbar. Through regular inspection and timely maintenance, the RV-02 pressure relief valve is always in good working order, providing strong support for the stable operation of the blower.