Wechat: 13869171699
English
pусский
Chinese
    Información
    Use and Maintenance of Pressure Relief Valves
    Use and Maintenance of Pressure Relief Valves
    2025-03-26
    During normal operation, the pressure in the air compressor system should not exceed 7.84×10^5 Pa (8 kg/cm²).Regularly check the cylinder, piston, flange connections, and pipelines of the pressure relief valve for any signs of leakage, and ensure that all fastening components are secure.A designat
    Roots Blower Selection and Applications
    Roots Blower Selection and Applications
    2025-03-25
    Pneumatic ash conveyingcoal-fired power plants can produce a large amount of fly ash in the production process. Firstly, the electrostatic precipitator is used to collect it into the ash hopper; Then put the coal ash into the transmission pipeline. Finally, use the compressed air discharged by the r
    Roots Blower Selection and Applications
    Roots Blower Selection and Applications
    2025-03-25
    1.Principle of Roots Blower Model SelectionFirstly, we should select the model, structure, and material of the roots blower according to the performance parameters, purpose, process requirements, and application occasions to meet the required working conditions. The inlet flow and pressure ris
    Common faults of water ring vacuum pumps
    Common faults of water ring vacuum pumps
    2025-03-24
    1. The wear and tear of the pump shaft bearing of the water ring vacuum pump is repaired and the wear of the transmission part is a common equipment problem in production-oriented enterprises, and the number is large and the damage is frequent, including various shafts, rollers, reducers, motors, pu
    Advantages and disadvantages of water ring vacuum pumps
    Advantages and disadvantages of water ring vacuum pumps
    2025-03-24
    Advantage1. The structure is simple, the manufacturing accuracy is not high, and it is easy to process.2. The structure is compact, the speed of the pump is high, and it can generally be directly connected with the motor without a deceleration device. Therefore, with a small structural size, a large
    Key points for the correct installation of water ring vacuum pumps
    Key points for the correct installation of water ring vacuum pumps
    2025-03-21
    一、Install the pump body and mechanical seal part of the water ring vacuum pump1. Install the static ring part of the mechanical seal on the pump body, and when installing the static ring part of the mechanical seal, you can use water to wet it and press it evenly into the pump body by hand. Be car
    The working principle of a water ring vacuum pump
    The working principle of a water ring vacuum pump
    2025-03-21
    Water ring vacuum pumps use the movement of an eccentrically mounted rotor to form a water ring in the pump chamber and between the two end caps to inhale, compress and expel gas. The core component consists of an eccentric rotor, as well as two end caps and pump chambers, which together form a conf
    The working principle of a magnetic levitation blower
    The working principle of a magnetic levitation blower
    2025-03-20
    The magnetic levitation blower is directly driven by a high-speed motor, regulated by a frequency converter, and the active magnetic levitation bearing system is used to carry out non-contact and wear-free suspension support for the internal rotating magnetic bearing through controllable electromagn
    ···4849505152···

    Enlace rápido

    Producto

    Greentech International (Zhangqiu) Co., Ltd.

    Llámanos.

    - llámanos.

    +86-531-83117088

    Correo electrónico:   greentech@vip.163.com

    Dirección: Mingshui Economic Development Zone, Zhangqiu, Jinan City, Shandong, China

    Wechat / Whatsapp: 13869171699

    Copyright © 2020  Green Science and Technology International (capítulo) Co.  | Derecho de autor