Wechat: 13869171699
English
pусский
Chinese
    Información
    Common faults of roots pumps
    Common faults of roots pumps
    2025-02-28
    1. The starting pressure of the roots pump is too high, which causes the parts of the pump to overheat and be damaged (some mechanical booster pumps can also be started under atmospheric pressure after special design).2. The large abrasive particles generated in the production process enter the root
    Roots pump maintenance method
    Roots pump maintenance method
    2025-02-28
    (1) Roots vacuum pump regular inspection:1. Daily inspection:1) Oil level check: too much oil will increase the temperature, and too little oil will cause poor lubrication.2) Temperature check: Check the temperature of each part of the pump with a thermometer.3) Motor load check: measure the motor l
    Blower product classification
    Blower product classification
    2025-02-27
    1.Roots blowerThe roots blower is a positive displacement blower, which is a kind of rotary blower, which uses two or three lobe rotors to move relative to each other in the cylinder to transport gas. Due to the continuous rotation of the rotor, the pumped gas is sucked from the air inlet to the air
    The role of the blower
    The role of the blower
    2025-02-27
    he air is inhaled, compressed, and spit out through the eccentric rotor, which is used in industrial production such as pressurization, ventilation, ventilation, and material transportation; Discharge polluted gases, introduce fresh air, and improve air quality; Reduce the ambient temperature in a h
    The application industry of the ring blower
    The application industry of the ring blower
    2025-02-26
    Ring blowers are widely used in paper cutters, cigarette filter forming machines, electroplating tank liquid stirring, water treatment aeration, aquaculture, screen printing machines, photographic plate making machines, injection molding machines, automatic feeding dryers, liquid filling machines, p
    Precautions for the installation of the vacuum blower
    Precautions for the installation of the vacuum blower
    2025-02-26
    1. It is necessary to use flat washers and spring washers to tighten the screws;2. It is best to use rubber buffer to bear the weight of the vortex fan, especially the high-power vortex fan, which is essential;3. For some occasions that require noise, a muffler can be installed to reduce noise (unde
    Common faults and maintenance of roots pumps
    Common faults and maintenance of roots pumps
    2025-02-25
    If the roots pump (mechanical booster pump) unit has been running for a period of time, there is abnormal noise in the roots pump, it may be due to the following reasons:1) The starting pressure of the roots pump is too high, which causes the parts of the pump to overheat and be damaged (some roots
    Roots vacuum pump installation steps
    Roots vacuum pump installation steps
    2025-02-25
    Prepare new parts:Before installing a new roots vacuum pump, make sure all parts are clean and ready.Mounting the bearing and impeller:Install the internal parts such as the bearing and impeller in sequence according to the position and orientation marked at the time of disassembly. Be c
    ···1920212223···

    Enlace rápido

    Producto

    Greentech International (Zhangqiu) Co., Ltd.

    Llámanos.

    - llámanos.

    +86-531-83117088

    Correo electrónico:   greentech@vip.163.com

    Dirección: Mingshui Economic Development Zone, Zhangqiu, Jinan City, Shandong, China

    Skype: guanglin_jiang

    Copyright © 2020  Green Science and Technology International (capítulo) Co.  | Derecho de autor