Wechat: 13869171699
English
pусский
Chinese
    Información
    2BV Liquid Ring Vacuum Pump Efficient Operation and Maintenance and Installation Guide
    2BV Liquid Ring Vacuum Pump Efficient Operation and Maintenance and Installation Guide
    2025-04-22
    When installing 2BV2061, it is necessary to ensure that the base is level, and the shock-absorbing rubber or bolt is poured and fixed, and the pipeline connection shall be made of oil-resistant rubber gasket, and the pipe diameter shall not be less than the suction diameter of the pump body. F
    2BV2061 1.5KW Liquid Ring Vacuum Pump
    2BV2061 1.5KW Liquid Ring Vacuum Pump
    2025-04-22
    In the industrial vapor recovery and vacuum treatment scenarios, the 2BV2061 liquid ring vacuum pump achieves the ultimate performance of 33mbar absolute pressure (97% vacuum) with a power of 1.5KW, and has become the core equipment of electric light source, chemical, pharmaceutical and other
    ZBK15 roots vacuum pump maintenance method
    ZBK15 roots vacuum pump maintenance method
    2025-04-21
    Despite the high reliability and stability of the ZBK15, some failures may still occur during long-term use. Here are some repair methods for common faults:1. Reduction of pumping efficiency: possible reasons include the loss of the vacuum pump due to loose belt, air leakage caused by packing
    ZBK15 roots vacuum pump installation points
    ZBK15 roots vacuum pump installation points
    2025-04-21
    To ensure that the ZBK15 high-pressure industrial blower pump can operate safely and efficiently, proper installation is crucial. Before installation, it is necessary to choose a bright and dust-free building with a temperature of 5 - 40°C as the installation site, and ensure that there is su
    RV-01 Pressure Relief Valve Routine Maintenance Method
    RV-01 Pressure Relief Valve Routine Maintenance Method
    2025-04-18
    1.Regular inspection: check whether the valve cylinder, piston and flange connection is leaking every month, and whether the fasteners are loose. The internal tension cylinder needs to be replaced every six months to prevent corrosion from affecting the sensitivity of the valve.2. Cleani
    RV-01 Pressure Relief Valve Installation Precautions
    RV-01 Pressure Relief Valve Installation Precautions
    2025-04-18
    1. Location selection: It is recommended to install the RV-01 pressure relief valve in a vertical position at the outlet or inlet pipe of the blower to ensure that the valve can respond quickly to pressure changes. If horizontal installation is required, it is necessary to make sure that the p
    Technical details and maintenance guidelines for 2RB blowers
    Technical details and maintenance guidelines for 2RB blowers
    2025-04-17
    In the pursuit of efficiency and durability, the 2RB high-pressure ratio bare shaft side channel blower leads the industry standard with technological innovation. Its core advantage lies in the high-pressure ratio design, which achieves a higher pressure lifting capacity by optimizing the airf
    The core value and advantages of 2RB blower
    The core value and advantages of 2RB blower
    2025-04-17
    In the field of soil remediation, the purification of every inch of land carries the mission of ecological restoration, and our 2RB high-pressure ratio bare shaft side channel blower is the efficient driving force behind this mission. Designed for high-pressure ratio applications, this blower
    ···1011121314···

    Enlace rápido

    Producto

    Greentech International (Zhangqiu) Co., Ltd.

    Llámanos.

    - llámanos.

    +86-531-83117088

    Correo electrónico:   greentech@vip.163.com

    Dirección: Mingshui Economic Development Zone, Zhangqiu, Jinan City, Shandong, China

    Skype: guanglin_jiang

    Copyright © 2020  Green Science and Technology International (capítulo) Co.  | Derecho de autor